Cater-Kwik LTD - Internet Prices with Traditional Service

The SM50 light duty ¾ horse power model is designed to process up to 50 meals per day, making it ideal for smaller catering establishments.

This model comes complete with remote electrical control switching & cabling.

Waste Capacity: 50 kg/hr.
Meals per day: 50.
Motor Power: ¾ hp.
Waste Connection: 30mm.
Comes with one touch reverse.
1 Phase: 220/240v, 13 amps.

Price: £488.00

The SM75 heavy duty ¾ horse power model is designed to process up to 500 meals per day, perfect for the busy commercial kitchen.

This model comes complete with remote electrical control switching & cabling.

Waste Capacity: 150 kg/hr.
Meals per day: 500.
Motor Power: ¾ hp.
Waste Connection: 1½" BSP (Male).
Comes with one touch reverse.
1 Phase: 220/240v, 13 amps.
3 Phase: 380/420v, 5 amps.

Price: £599.00

A small Waste Disposer for mounting under a sink bowl. A cut-out of 89mm (3½”) is required in order to mount the unit to the sink,. The unit is supplied complete with wall mounted motor control box incorporating 12 volt printed circuit.

Fitted motor - ½hp high torque continuously rated reversing motor which is fan cooled with capacitor start & incorporating thermal cut-out. The units have precision cutting head & the rubber housing is particularly efficient at absorbing vibration & reducing noise levels. All types supplied complete with ‘S’ trap for connection to 2” waste pipe. The outlet is fully adjustable through 360° to suit any particular installation.

Operation is fully automatic. Immediately the unit is switched on the solenoid valve fitted to the water supply is actuated. The flow rate consumption is approximately 12 to 16 litre/minute.

Electrical control equipment - it reduces the input voltage 240v to 12v & ensures greater safety in the possible event of an electrical fault. A PRINTED CIRCUIT incorporates a no-volt release device.

ELECTRICAL: Connection to be made from a fused isolator. All units supplied with 2 metres mains cable wired into the control box.

WASTE CONNECTION: 54mm plastic or copper pipe to be connected to ‘S’ trap supplied with units, laid to a minimum fall of 1 in 16. The pipework should be as simple as possible with no sharp bends.

MAINTENANCE: No routine maintenance is required other than regular cleaning & inspection. A release key is provided to free the rotor should it become jammed.

1 YEAR FULL WARRANTY.

Price: £800.00