Commercial Potato Peelers

Top branded, tried & tested commercial potato peelers from Fimar, IMC, Stigwood & Sons, Metcalfe, Hobart & Electrolux.

New from IMC - The CS Range - full chip shop system.

SAMMIC: M-5, PP-6+, PPC-6+, PP-12+, PPC-12+, PI-10, PI-18, PI-30.

FIMAR: 5kg Counter Top, 10kg Freestanding, 18kg Freestanding, 18kg With Stand, 25kg Freestanding & 25kg With Stand.

METCALFE: 10lb Bench, 15lb Bench, 14lb Standard Height, 14lb Sink Height, 28lb Standard Height, 28lb Sink Height & 56lb Freestanding.

IMC: MF5, MF10, MF15, VP3.5, VP7, SP12, SP25 & SMP25.

HOBART: E6414-10 & E6128-10.

STIGWOOD & SONS: 28lb Freestanding & 56lb Freestanding.

CK0338 Fimar PPN5 5kg / 11lb Potato Peeler

Italian made.
Constructed from stainless steel.
Safety microswitch on the upper cover & on the outlet.
Button for ejection of the food.
Timer 0 - 4 minutes.
Automatic water jet to assist elimination of peel residues.
Extractable abrasive plate.

Capacity: 5kg / 11lb.

Hour Production: 60kg/h.

Weight: 26kg.

NEXT WORKING DAY DELIVERY.

Lease to buy from £6.20 per week!

Dimensions:W630 x D630 x H590mm.

Power Requirements:0.5HP.

Special Requirements:Please refer to manufacturers specification

More Information »

Price: £689.00

Warranty:
Quantity: 
Sammic PP-6+/PPC-6+ Potato Peelers

Manufactured in cast aluminium alloy.
Highly resistant and long lasting abrasive peeling.
Integral control panel complete with on/off push buttons & a 0-6 minute timer.
PPC-6+ includes attatchment drive to power accessories.
(STAND IN PICTURE NOT INCLUDED)

Output: 6kg per cycle.

Hopurly Production: 120/150kg.

Plate Speed: 317rpm.

Net Weight: 32 kg.

1 YEAR PARTS OR 1 YEAR PARTS & LABOUR.

Lease to buy from £7.06 per week!

Dimensions:W395 x D700 x H945mm.

Power Requirements:Single phase - 230V.
Three phase - 230 - 400V.

Special Requirements:Please refer to manufacturers specification

More Information »

Price: £785.00

Warranty Options:
Supply:
Quantity: 
Metcalfe 10lb Belt Driven Bench Potato Peeler


BRITISH MADE!

The Metcalfe 10lb (4.5kg) potato peeling machine is constructed from non-corrosive aluminium alloy castings, with the spindle housing & chute cast integrally, eliminating possible leakage.
The patented guarded discharge chute protects the user by preventing hand access through the door aperture whilst the machine is working.

LUBRICATION: There are no oiling or greasing points & no lubrication is required. All bearings are grease packed & permanently sealed.

ROTOR PLATE: Coated on both sides - fine on one side for new potatoes & coarse on the other.
The peeling chamber has cast-in abrasive serrations which removes the need for abrasive coating - this reduces potato loss.

CLEANING: Top casting is removable without tools for easy cleaning.

WASTE DISPOSAL ADAPTOR: Dispenses with the need for interceptors so the waste pipe can be connected directly to the drain. The adaptor provides an additional water supply to the waste outlet to flush away the sludge. Water Byelaws Scheme - Approved product when connected to a water header tank.

Height Of Peeling Chamber: 320mm.

1 YEAR PARTS & LABOUR WARRANTY.

Lease to buy from £7.11 per week!

Dimensions:W320 x D480 x H370mm.

Power Requirements:1/4hp.

Special Requirements:Please refer to manufacturers specification

More Information »

Price: £789.99

Finish Options:
Waste Disposal Options:
Mounting Options:
Guarded Discharge Chute:
Sink Skip:
3ft Length Water Inlet Hose & Tap Connector:
Waste Pipe, Elbow & Coupling:
Quantity: 
Sammic M-5 Potato Peelers

Stainless steel body.
Base plate lined with abrasive.
Very easy to install.
Can be placed near kitchen sink for drainage.
Ideal for small spaces.
(STAND IN PICTURE NOT INCLUDED)

Hourly Output: 80/100 kg/h.

Net Weight: 15kg.

1 YEAR PARTS OR 1 YEAR PARTS & LABOUR.

Lease to buy from £7.37 per week!

Dimensions:W333 x D367 x H490mm.

Power Requirements:Single phase, 230V.

Special Requirements:Please refer to manufacturers specification

More Information »

Price: £819.00

Warranty Options:
Quantity: 
IMC MF5 5kg / 11lb Multi-Functional Potato Peeler


BRITISH MADE!

Using a range of plates, the MF5 is designed to peel & wash potatoes & carrots, wash mussels & spin salads.

Carborundum peeling plate.
Integral timer.
Interlocked lid with viewing panel.
Safety baffle on discharge door & water inlet with air break.

Maximum Capacity: 5kg / 11lb.

Output: 45kg/hour.

Weight: 33kg.

2 YEAR PARTS & LABOUR WARRANTY.

Lease to buy from £7.60 per week!

Dimensions:W366 x D515 x H632mm.

Power Requirements:0.18kW (1/4 HP).

Special Requirements:Please refer to manufacturers specification

More Information »

Price: £845.00

Model Options:
Stand & Filter Basket:
Inlet Hose Kit:
Additonal Carborundum Peeling Plate:
Quantity: 
IMC VQ3.5 3.5kg / 7.7lb Potato Peeler


BRITISH MADE!

With a small footprint & quiet running motor, the VQ3.5 fits into any small or medium sized kitchen.

Robust stainless steel & cast aluminium construction.
Polished stainless steel cylinder lid.
Rotating cylinder with screw-down handles.
Easy to wash down & clean.
Heavy duty belt & pulley drive.
Non-rusting cast aluminium peeling plate.
Easy to use manual timer.
Non-handed controls.
WRAS approved Class AA air-break with brass spray nozzle.

Maximum Capacity: 3.5kg / 7.7lb.

Output: 35kg/hour.

Weight: 31kg.

2 YEAR PARTS & LABOUR WARRANTY.

Lease to buy from £7.85 per week!

Dimensions:W650 x D380 x H425mm.

Power Requirements:Motor: 180W.

Power:
Single Phase: 230V, 10A.
Three Phase: 400V, 5A.

Special Requirements:Please refer to manufacturers specification

More Information »

Price: £872.00

Phase:
Sink Skip - For Use With Bench Mounted Machines:
Trolley - 890mm High:
Pedestal - Lifts Potato Discharge Height In Steps To 750, 800, 850, 900 & 950mm:
Waste Ejector - 2 Inch BSP:
Interceptor Tank - For Pedestal Mounted Machines, 2 Inch BSP:
Lid Retaining Strap - Marine Use:
Bench Mounting Plate:
Quantity: 
Sammic PP-12+/PPC-12+ Potato Peelers

Manufactured in cast aluminium alloy.
Highly resistant & long lasting abrasive peeling.
Integral control panel complete with on/off push buttons & a 0-6 minute timer.
PPC-12+ includes attatchment drive to power accessories.
(STAND IN PICTURE NOT INCLUDED)

Output: 12kg per cycle.

Hourly Production: 220/270kg.

Plate Speed: 317rpm.

Net Weight: 38 kg.

1 YEAR PARTS OR 1 YEAR PARTS & LABOUR.

Lease to buy from £8.59 per week!

Dimensions:W395 x D700 x H503mm.

Power Requirements:Single phase - 230V.
Three phase - 230 - 400V.

Special Requirements:Please refer to manufacturers specification

More Information »

Price: £955.00

Warranty Options:
Supply:
Quantity: 
Metcalfe 15lb Belt Driven Bench Potato Peeler


BRITISH MADE! ***

The Metcalfe 15lb (6.8kg) potato peeling machine is constructed from non corrosive aluminium alloy castings, with the spindle housing & chute cast integrally, eliminating joints & possible leakage.
Patented guarded discharge chute.

LUBRICATION: No oiling or greasing required. All bearings are grease packed & permanently sealed.

ROTOR PLATE: Coated on both sides, one fine abrasive for new potatoes, the other coarse grained.
Patented peeling chamber - has cast-in abrasive serrations. This reduces potato loss & means the peeling chamber will never need re coating. The rotor plate is easy to remove for cleaning.

CLEANING: Top casting is removable without tools for easy cleaning.

WASTE DISPOSAL ADAPTOR: Optional extra which dispenses with the need for interceptors so that the waste can be connected directly to the drain. Water byelaws approved product when connected to a header tank.

Height Of Peeling Chamber: 390mm.

1 YEAR PARTS & LABOUR WARRANTY.

Lease to buy from £8.68 per week!

Dimensions:W320 x D450 x H450mm.

Power Requirements:1/3hp.

Special Requirements:Please refer to manufacturers specification

More Information »

Price: £964.99

Finish Options:
Waste Disposal Options:
Mounting Options:
Guarded Discharge Chute:
Sink Skip:
3ft Length Water Inlet Hose & Tap Connector:
Waste Pipe, Elbow & Coupling:
Quantity: 
IMC VQ7 7kg / 14lb Potato Peeler


BRITISH MADE!

With a capacity of 7kg (14lb) & an output of 50kg per hour, this is a powerful peeler in a compact package.

Robust stainless steel & cast aluminium construction.
Polished stainless steel cylinder lid.
Rotating cylinder with screw-down handles.
Easy to wash down & clean.
Heavy duty belt & pulley drive.
Non-rusting cast aluminium peeling plate.
Easy to use manual timer.
Non-handed controls.
WRAS approved Class AA air-break with brass spray nozzle.

Maximum Capacity: 7kg / 14lb.

Output: 50kg/hour.

Weight: 33kg.

2 YEAR PARTS & LABOUR WARRANTY.

Lease to buy from £9.57 per week!

Dimensions:W650 x D380 x H500mm.

Power Requirements:Motor: 180kW.

Power:
Single Phase: 230V, 10A.
Three Phase: 400V, 5A.

Special Requirements:Please refer to manufacturers specification

More Information »

Price: £1063.00

Phase:
Sink Skip - For Use With Bench Mounted Machines:
Trolley - 890mm High:
Pedestal - Lifts Potato Discharge Height In Steps To 750, 800, 850, 900 & 950mm:
Waste Ejector - 2 Inch BSP:
Interceptor Tank - For Pedestal Mounted Machines, 2 Inch BSP:
Lid Retaining Strap - Marine Use:
Bench Mounting Plate:
Quantity: 
Sammic PI-10/PI-30 Potato Peelers

Construction in stainless steel.
PI-10 walls lined with abrasive.
PI-30 contains lateral stirrers covered silicon carbide abrasive.
Aluminium base plate lined with silicon carbide abrasive, easliy removable for cleaning.
Liftable transparent polycarbonate cover, complete with locking and safety device.
Aluminium door with hermetic seal & safety device.
Waterproof control board with improved reliabilty against moisture & water splash.
Water inlet system with non-return air break.
PI-30 contains water inlet system fitted with electric valve.
0-6 minute timer and continuous operation.
(STAND IN PICTURE NOT INCLUDED)

Hourly Output:
PI-10 - 200/240 kg/h.
PI-30 - 600/720 kg/h.

Net Weight:

PI-10 - 39kg.
PI-30 - 60kg.

1 YEAR PARTS OR 1 YEAR PARTS & LABOUR.

Lease to buy from £10.94 per week!

Dimensions:W622 x D760 x H950mm.

Power Requirements:Single phase - 230V.
Three phase - 230 - 400V.

Special Requirements:Please refer to manufacturers specification

More Information »

Price: £1215.00

Warranty Options:
Supply:
Quantity: 
CK0341 Fimar PPN25 25kg / 55lb Potato Peeler



Italian made.
Constructed from stainless steel.
Safety microswitch on the upper cover & on the outlet.
Button for ejection of the food.
Timer 0 - 4 minutes.
Automatic water jet to assist elimination of peel residues.
Extractable abrasive plate.

Capacity: 25kg / 55lb.

Hour Production: 450kg/h.

Weight: 70kg.

CK0339 Pictured.

NEXT WORKING DAY DELIVERY.

Lease to buy from £12.86 per week!

Dimensions:Dimensions: W450 x D900 x H780mm.
NB Footprint: W427 x D427mm.

Power Requirements:1.5HP.

Special Requirements:Please refer to manufacturers specification

More Information »

Price: £1599.00

Warranty:
Quantity: 
Metcalfe 14 / 28lb Heavy Duty Gear Driven Potato Peelers


BRITISH MADE!

The Metcalfe heavy duty peelers are made in two capacities, either 14lb (6.3kg) or 28lb (12.6kg). Each machine can be supplied with standard or sink height pedestals.
Easy to operate, clean & built for reliability.

CONSTRUCTION: Rust proofed steel pedestals & cast aluminium bases. Non corrosive ductile aluminium alloy made for direct contact with food, is impervious to brine, starch & mild acids.
The main drive shaft runs in ball races in a large grease chamber.

1.3hp motor. The drive between the output shaft & the drive shaft of the peeler is by means of flexible coupling which will prevent damage to the motor or gearbox if the machine is accidentally jammed or overloaded.

CLEANING: The top of the peeling chamber lifts off so that the rotor plate can be removed with two lifting hooks.

ABRASIVE: The rotor plate is bonded with abrasive grit. The wall of the chamber has cast-in abrasive serrations which removes the need for abrasive coating - reduces potato loss & means the chamber never needs re coating.

SLUDGE DISPOSAL: The waste disposal adaptor dispenses the need for an interceptor although internal or external interceptors are available.
Water byelaws approved when connected to a header tank.

1 YEAR PARTS & LABOUR WARRANTY.

Lease to buy from £13.31 per week!

Dimensions:14lb - W480 x D482 x H900mm.
28lb - W480 x D482 x H930mm.

Power Requirements:14lb - 1/3hp, 28lb - 1/2hp.

Special Requirements:Please refer to manufacturers specification

More Information »

Price: £1479.00

Model:
Discharge Chute:
Large External Interceptor:
Waste Disposal Adaptor:
3ft Water Inlet Hose & Tap Connector:
Electrical Supply:
Quantity: 
Hobart E6414-10 6.3kg / 14lb Potato Peeler

Robust & built for continuous commercial operation.
Provides maximum performance & long life expectancy whilst delivering consistent results.
Bull nose on inside of the door ensures turning of vegetables, reducing weight loss & improving peeling time.
Can be used for a variety of other vegetables.
Peel trap options.
Cold water feed.
Hose connector.

Capacity: 6.3kg / 14lb.

1 YEAR PARTS & LABOUR WARRANTY.

Lease to buy from £13.40 per week!

Dimensions:W311 x D608 x H464mm.

Power Requirements:250w.

Special Requirements:Please refer to manufacturers specification

More Information »

Price: £1489.00

Tubular Stand:
Quantity: 
CK0415 Fimar PPF25 25kg / 55lb Potato Peeler With Stand

Italian made.
Constructed from stainless steel.
Safety microswitch on the upper cover & on the outlet.
Button for ejection of the food.
Timer 0 - 4 minutes.
Automatic water jet to assist elimination of peel residues.
Extractable abrasive plate.
Optional filter drawer.

Capacity: 25kg / 55lb.

Hour Production: 450kg/h.

Weight: 70kg.

CKO413 pictured.

NEXT WORKING DAY DELIVERY.

Lease to buy from £15.29 per week!


Dimensions:W540 x D900 x H1350mm.

Power Requirements:1.5HP.

Special Requirements:Please refer to manufacturers specification

More Information »

Price: £1599.00

Warranty:
Filter Drawer CK0414:
Quantity: 
IMC SP12 12kg / 26.4 lb Potato Peeler


BRITISH MADE!

Handling up to 12kg of potatoes per load (equivalent to half a 56lb sack) the SP12 peeler is a cost-effective solution for smaller operations.

The carborundum liner acts as a fill guide.
Robust stainless steel lid with secure push fit.
WRAS approved class A airbreak.
Quick & easy to clean.
Designed for easy maintenance.
Hygienic, robust stainless steel & cast alloy construction.
Rust-proof peeling plate & reversible rust-proof liners.
Dual position for waste outlet.
Quiet operation.
Energy efficient.

Maximum Capacity: 12kg / 26.4lb.

Output: 120kg/hour.

Weight: 63.5kg.

2 YEAR PARTS & LABOUR WARRANTY.

Features.
Detailed Specification.
Detailed Dimensions.

Lease to buy from £14.43 per week!

Dimensions:Low Pedestal - W530 x D624 x H1120mm.
High Pedestal - W530 x D624 x H1400mm.

Power Requirements:Motor: 0.37kW (1/2 HP).

Special Requirements:Please refer to manufacturers specification

More Information »

Price: £1603.00

Model Options:
Integral Filter Basket:
Floor Standing Interceptor Tank:
Waste Ejector - 2 inch BSP:
Lid Retaining Strap:
Quantity: 
IMC MF10 10kg / 22lb Multi-Functional Potato Peeler


BRITISH MADE!

Using a range of plates, the MF10 is designed to peel & wash potatoes & carrots, wash mussels & spin salads.

Carborundum peeling plate.
Integral timer.
Interlocked lid with viewing panel.
Safety baffle on discharge door & water inlet with air break.

Maximum Capacity: 10kg / 22lb.

Output: 100kg/hour.

Weight: 70kg.

2 YEAR PARTS & LABOUR WARRANTY.

Lease to buy from £14.93 per week!

Dimensions:W481 x D630 x H1130mm.

Power Requirements:Motor: 0.37kW (1/2 HP).

Special Requirements:Please refer to manufacturers specification

More Information »

Price: £1659.00

Model Options:
Inlet Hose Kit:
Additonal Carborundum Peeling Plate:
Quantity: 
Stigwood & Sons 12.7kg / 28lb Potato Peeler

Hand built in the UK to the highest specification Stigwood & Sons are quite rightly very proud of their machines.

This heavy duty 28lb machine is made with a ONE PIECE drive shaft which means no cross pin to break.
Extra large fully protected bearings.
One horse power motor.
The machine features a double belt drive which Stigwood claim to be more reliable than gears. It is very, very unlikely that both belts will break at the same time.
A very reliable machine built for a long trouble free life.

2 YEAR PARTS & LABOUR WARRANTY.

Dimensions:

Power Requirements:

Special Requirements:Please refer to manufacturers specification

More Information »

Price: £1699.00

Quantity: 
IMC MF15 15kg / 33lb Multi-Functional Potato Peeler / Onion Peeler


BRITISH MADE!

Using a range of plates, the MF15 is designed to peel & wash potatoes & carrots, wash mussels & spin salads.

Carborundum peeling plate.
Integral timer.
Interlocked lid with viewing panel.
Safety baffle on discharge door & water inlet with air break.

Maximum Capacity: 15kg / 33lb.

Output: 150kg/hour.

Weight: 70kg.

NEED ADDITIONAL ATTACHMENT IN ORDER TO PEEL ONIONS - AS SHOWN BELOW:



2 YEAR PARTS & LABOUR WARRANTY.

Lease to buy from £16.91 per week!

Dimensions:W481 x D630 x H1195mm.

Power Requirements:0.37kW (½ HP).

Special Requirements:Please refer to manufacturers specification

More Information »

Price: £1879.00

Model Options:
Inlet Hose Kit:
Additonal Carborundum Peeling Plate:
Quantity: 
IMC SP25 25kg / 55lb Heavy Duty Potato Peeler


BRITISH MADE!

Handling up to 25kg per load (equivalent to a 56lb sack of potatoes) the SP25 peeler is ideal for larger & busier operations.

High grade stainless steel & cast alloy construction ensure durability, combining strength with
ease of use & cleaning.
WRAS approved class A airbreak.
Quick & easy to clean.
Designed for easy maintenance.
Hygienic, robust stainless steel & cast alloy construction.
Rust-proof peeling plate & reversible rust-proof liners.
Dual position for waste outlet.
Quiet operation.
Energy efficient.

Maximum Capacity: 25kg / 55lb.

Output: 250kg/hour.

Weight: 80kg.

2 YEAR PARTS & LABOUR WARRANTY.

Feature List.
Detailed Specification.
Detailed Dimensions.

Lease to buy from £18.06 per week!

Dimensions:Low Pedestal - W564 x D725 x H1080mm.
High Pedestal - W564 x D725 x H1360mm.

Power Requirements:0.75kW (1 HP).

Special Requirements:Please refer to manufacturers specification

More Information »

Price: £2067.00

Model Options:
Integral Filter Basket:
Floor Standing Interceptor Tank:
Waste Ejector 2 Inch BSP:
Lid Retaining Strap:
Quantity: 
Metcalfe 56lb Heavy Duty Potato Peeler


BRITISH MADE!

This extremely efficient & robust potato peeler is designed for regular, high volume use & enables up to 300kg of potatoes to be prepared every hour!

Hygienic brushed stainless steel finish.
Solid cast aluminium peeler plate, stainless steel chute & hopper offer a long maintenance-free service life.
Large hopper opening with a robust lip & simple to use wall mounted controls.
Control unit prevents automatic restart in the event of the power being cut.
Exceptionally quiet motor & water inlet performance.
Incredibly energy efficient.

Discharge Height:

Low Pedestal - 650mm.
High Pedestal - 930mm.

Output: 300kg per hour.

1 YEAR PARTS & LABOUR WARRANTY.

Lease to buy from £23.03 per week!

Dimensions:W564 x D725 x H1080mm.

Power Requirements:2hp - single phase 230/240V.
2hp - three phase 380/415V.

Special Requirements:Please refer to manufacturers specification

More Information »

Price: £2559.00

Model:
Guarded Discharge Chute:
Waste Disposal Adapter:
Quantity: 
IMC SMP25 25kg / 55lb Potato Peeler


BRITISH MADE!

The SMP25 handles up to 25kg of potatoes per load, making it particularly suitable for busier operations.

Robust & compact with a space-saving integral filter basket.
Simple to use, saving time & costs, incorporating a timer & start/stop buttons mounted next to the discharge chute for easy operation.
Cylinder liners are quick & easy to replace & reversible for extended working life.
Can be specified with optional washer or combi peeler/washer functions for even greater flexibility.
No volt release.
Lid interlock.
Quick & easy to clean.
Designed for easy maintenance.
Hygienic, robust stainless steel & cast alloy construction.
Quiet operation.
Energy efficient.

Maximum Capacity: 25kg / 55lb.

Output: 250kg/hour.

Weight: 101kg.

2 YEAR PARTS & LABOUR WARRANTY.

Lease to buy from £23.66 per week!

Dimensions:W550 x D775 x H1260mm.

Power Requirements:1.1kW (1 1/2 HP).

Special Requirements:Please refer to manufacturers specification

More Information »

Price: £2629.00

Inlet Hose Kit:
Quantity: 
Hobart E6128-10 13kg / 28lb Potato Peeler

Robust & built for continuous commercial operation.
Provides maximum performance & long life expectancy whilst delivering consistent results.
Bull nose on inside of the door ensures turning of vegetables, reducing weight loss & improving peeling time.
Can be used for a variety of other vegetables.
Built in peel trap.
Cold water feed.
Hose connector.

Capacity: 13kg / 28lb.

1 YEAR PARTS & LABOUR WARRANTY.

Lease to buy from £23.97 per week!

Dimensions:W559 x D594 x H946mm.

Power Requirements:370w.

Special Requirements:Please refer to manufacturers specification

More Information »

Price: £2663.00

Timer For Wall Mounting:
13 Inch Extension Legs:
15 Inch Extension Legs:
Peel Ejector Unit:
Quantity: 
Stigwood & Sons 25.4kg / 56lb Potato Peeler

This is a 56lb (full bag) extra heavy duty potato peeling machine.

Robustly constructed ensuring reliability & long life, needing only the minimum of service.
Deep Abrasive on Peeling Chamber & Rotor (Bottom Plate).
ONE PIECE Drive Shaft, this feature completely eliminates any down time owing to cross pins breaking.
Extra large double "V" belt drive, no complicated gears to go wrong at inconvenient times.
Powerful two horsepower motor, most other makes of machines this size are only fitted with a one horse power motor.
It is not necessary to bolt this machine down, but should this be desired provision is made for this to be done.
Large factory sealed bearings are fully protected from water, & therefore will last many times longer than bearings fitted in other machines.

2 YEAR PARTS & LABOUR WARRANTY.

Dimensions:

Power Requirements:

Special Requirements:Please refer to manufacturers specification

More Information »

Price: £2950.00

Quantity: 

Recently viewed items